Calibrator

Hide or show navigationPrevious topicNext topicSharePrintPDF

Calibration Manager

Calibration Manager allows you to view and delete calibration settings. Comments can also be added to or deleted from individual calibrations.

Typically, calibration settings and output profiles are appropriate for specific paper and printing conditions. A calibration setting can be associated with more than one output profile.

Open Calibration Manager from Calibrator by clicking in the lower-left corner of the window. The window displays all the calibrations for the selected server. The following categories are shown:

  • Calibration: Completed calibrations for the server listed by name.
  • Last calibrated: The time of the last calibration.
  • Color mode: The color mode is the color space of the output profiles that the calibration set supports.

You can perform a number of actions for the calibration you select in the list. Not all actions are available for all calibrations. If an action is not available, it is grayed out. The actions are:

  • Edit opens a window where you can edit the basic information of a custom calibration setting.
  • View measurements opens a window providing more details about the highlighted calibration.

    The information displayed in the window is determined by the measurement space.

  • Delete removes the selected calibration set.

    Profiles relying on this calibration will also be deleted, after confirmation from the operator. Factory calibration sets, such as Plain, cannot be deleted.