To use a media profile (output profile) or device link profile in Command WorkStation, you must connect it to a calibration
file.
- Under Calibration, click
Select and browse to the calibration file.
-
Under Media name, type
the name of the media. This is the name that will appear in Command WorkStation.
It is recommended that you type a new
media name. If you use an existing media name, the media profile will have more than one calibration
file connected to it, and you will have to select which one to apply in Command WorkStation.
-
Do any of the following (optional):
-
Under Media feed adjustment, enter an actual media length and a target
media length.
You can correct any inconsistency in the output
length of jobs. Inconsistencies can occur as a result of a particular combination of printer and
media.
-
Select Print unidirectional.
Unidirectional printing achieves more accurate
results than unidirectional printing, but is slower.
-
Under Connect to
profiles, select the media or device link profile. Do one or both of the
following:
-
Select Media profile ICC, click Select, and browse
to the media profile.
-
Select Device Link, click Select, and browse to the
device link profile.
-
Click OK.
The calibration file is saved to the
C:\ProgramData\EFI\EFI Media Profiles folder.
You can now select the calibration file or
device link profile in Command WorkStation.
